FINITO
BLANKETS AND UNDERPACKING SOLUTIONS
A revolutionary product made for speed up and simplifiying the life of professional printers. A giant improvement over standard products with economical benefits too. Finito is a complete line of more than 20 thickness to fit your needs.
Underpacking
Finito® is available in different version: Finito® S no adhesive installed as the conventional under packing. Finito® W Self Adhesive, to be pasted directly on the blanket cylinder, offering stability and rapidity in blanket change, ideal for all presses in the size range 19” to 40”. Finito® B based its technology on a double side of TPU, specific for large format, avoiding packing wrinkles, with an high mechanical resistance.
Finito® Circle is the new born, based on the Circular Economy respecting the environment impact, maintain the technology of Finito® to offer the same printing performance.
| Finito® |  Off Set sheetfed, Small-Medium and Large format |
 Off Set sheetfed, Small-Medium format. Adhesive |
 Medium and Large format, not adhesive |
 Off Set sheetfed, Small-Medium format. No Adhesive |
|---|---|---|---|---|
| Description | Elastomeric Film Laminated on Polyester, high mechanical resistance, high milage. Ready to use thickness | Elastomeric Film laminated on Adhesive polyester in ready to use thickness | Elastomeric Films on booth sides of the polyester carrier. Offer high stability on press, wrinkle less | Based on a paper support obtained from the recycling of the fruit waste. |
| Color | Acid green | Rubin red | Acid green / Blue | Brown / Light green |
| Surface | Smooth | Smooth | Smooth | Smooth |
| Tolerance | ± 20 μm | ± 20 μm | ± 20 μm | ± 20 μm |
| Hardness (Shore A) |
76 | 76 | 86 | 76 |
| Cylinder side | Polyester | Adhesive Polyester | Blue side | Either side |
BLANKET
Finito Foil
Finito® foil is a special product developed for “cold foil” application.
The very low roughness of the top layer allows to achieve a very smooth laminated foil onto the paper or the carton board. Moreover the special characteristics of the top layer, which takes advantage of nanotechnology in its preparation, give a very high rub and scratch resistant surface.
| Physical properties | Typical value |
|---|---|
| Nominal Thickness | 1,70 – 1,95 – 0,67” – 0,78” |
| Elongation (%) | < 0.9 |
| Tensile Strength (N/mm) | > 60 |
| Average load value (N/cm @0.23 indentation) | 250 |
Finito Gold
Finito® Gold is a special blanket for precision printing, hot and cold foil stamping, embossing.
| Physical properties | Typical value |
|---|---|
| Construction | 2 ply blanket coupled to an elastomeric layer |
| Printing surface | ultra-fine glass beads coating |
| Surface Hardness (Shore A) | 90 |
| Top surface colour | black |
| Bottom hardness (Shore A) | 75 |
| Bottom colour | gold |
| Total thickness (mm) * | 1.15 ± 0.02 |
| Sheets | CAD-driven cut sheets for Gallus and Nilpeter presses |
*Other thicknesses are available on request.
Finito no•stop
Finito® no•stop is a patented product and concept that combines the best technology of the printing blanket along with the technology of the innovative under packing Finito®.
| Finito no·stop® ST | Finito no·stop® cold/LED UV | Finito no·stop® Hi | Finito no·stop® HT | |
|---|---|---|---|---|
| Construction | 3 ply with elastomeric layer |
3 ply with elastomeric layer |
3 ply with special layer |
3 ply with elastomeric layer |
| Top surface color | Blue | Black | Dark Green | Green |
| Bottom color | Scarlet | Scarlet | Orange | Scarlet |
| Printing surface | Hybrid compound for conventional and UV inks | Compound for LED and UV inks |
Hybrid compound for conventional and UV inks | Hybrid compound for conventional and UV inks |
| Printing surface finish | Microbuffed | Microbuffed | Microbuffed | Microbuffed |
| Surface roughness – Ra (µm) | 0.4÷0.8 | 0.6÷1.0 | 0.9÷1.2 | 0.6÷1.0 |
| Compressible layer | Closed cells | Closed cells | Closed cells | Closed cells |
| Average load value (N/cm² @0,23 mm indentation) |
~ 160 | ~ 250 | ~ 250 | ~ 250 |
| Thickness (mm – inches) |
From 2.35 to 2.55 | From 2.35 to 2.55 mm 0.93 to 1.00 |
From 2.70 to 3.50 mm 1.06 to 1.38 inches |
On request |
| Hardness (Shore A) |
78 | 78 | 81 | 78 |
COATING PLATE
Finito® rain and all season can be processed manually or with a Cad/Cam Plotter.
| Nominal Thickness (mm – inches) |
Application | Colour | Structure | Surface | Stencil depth | Hardness (Shore A) |
||
|---|---|---|---|---|---|---|---|---|
 |
 |
1,15 ± 0,05 0,46”± 0,02” |
Aqueous / UV | Green | Polyester | Smooth | 0,80 | 83 |
|
 |
1,35 ± 0,05 0,53” ± 0,02” |
Aqueous / UV | Green | Polyester | Smooth | 1,00 | 83 |
 |
 |
1,15 ± 0,05 0,46”± 0,02 |
UV / Aqueous | Light green | Polyester | Smooth | 0,80 | 83 |
|
 |
1,35 ± 0,05 0,53” ± 0,02” |
UV / Aqueous | Light green | Polyester | Smooth | 1,00 | 83 |
|
 |
1,95 ± 0,05 0,78”± 0,02” |
UV / Aqueous | Light green | Polyester | Smooth | 1,00 | 83 |
PRESS WRAP
Finito® dress is an innovative product based on a special self-adhesive transparent film especially studied to protect from ink or glue stain the printing machine, either offset or web offset, flexo, gravure, silk screen or digital printing.
Finito® dress anti-shock is an innovative product, especially studied to protect monitors, touchscreens, control console of printing presses and particular areas easy to be scratched, such as where printing plates are placed.
Cleaning or removing Finito® Dress and the machine will looks new again
